2N Verso Main Unit with Camera - black (01274-001)
Pozvati za cenu
Order number: 01274-001
Technical Parameters
| Power Supply Types in compliance with LPS/PS2: | |
|---|---|
| PoE | IEEE PoE 802.3af (Class 0, max. 12.95 W) |
| External supply | LPS/PS2 rated, 12 V ±15 % / 2 A DC (3 A in case of multiple modules) |
| Signaling protocol | |
|---|---|
| SIP | UDP, TCP, TLS |
| Buttons | |
|---|---|
| Button design | Transparent, white backlit buttons with easily replaceable nametags |
| Button count | 1 to multiples of 5 (depending on the configuration) |
| Button extenders | Up to 29 modules (limited by power supply) |
| Numeric Keypad | Optional |
| Audio | |
|---|---|
| Microphone | Integrated |
| Amplifier | 2 W (class D) |
| Speaker | 2 W / 8 Ω |
| Sound pressure level (SPL max) | 78 dB (pro 1 kHz ve vzdálenosti 1 m) |
| LINE OUT | 1 VRMS / 600 Ω |
| Volume Control | Adjustable with automatic adaptive mode |
| Full duplex | Yes (AEC) |
| Audio power output | 0.89 |
| Audio stream | |
|---|---|
| Protocols |
|
| Codecs and Used Bandwidth |
|
| Camera | |
|---|---|
| Sensor | 1/3’’ colour CMOS |
| JPEG resolution | Up to 1280 x 960 |
| Video resolution | 640 x 480 |
| Frame rate | up to 30 frames |
| Sensor sensitivity | 5.6 V/lux-sec (550 nm) |
| Viewing angle | 128° (H), 95° (V) |
| Infrared illumination | Yes |
| Sensor sensitivity without IR light | 0.1 Lux ± 20 % |
| Focal length | 2.25 mm |
| Video stream | |
|---|---|
| Protocols |
|
| Video call codecs |
Set the video codec data flows in for calls and in for streaming. The set bit rate represents the value that the codec has to approach on a long-time average. The data flow can vary depending on the scene to be scanned. |
| ONVIF/RTSP streaming codecs |
|
| IP Camera Function | Yes – compatible profiles:
|
| Bandwidth used | |
|---|---|
| Audio codecs |
|
| Video Codecs | Set the video codec data flows for calls in . Set streaming in . The set bit rate represents the value that the codec has to approach on a long-time average. The data flow can vary depending on the scene to be scanned. |
| Interface | |
|---|---|
| LAN | 10/100BASE-TX with Auto-MDIX, RJ-45 |
| Recommended cabling | Cat-5e or higher |
| Passive switch (relay) | make and break contact (NO/NC), up to 30 V / 1 A AC/DC |
| Active switch output | 8 to 12 V DC according to power supply, up to 400 mA
|
| Passive / active input | −30 V to +30 V DC |
| Standard RFID card reader | Secured RFID card reader |
|---|---|
| Maximum magnetic field strength at 10 m: 66 dBμA/m | Maximum magnetic field strength at 10 m: 60 dBµA/m |
| Bluetooth | |
|---|---|
| Bluetooth | in compliance with BLE (Bluetooth Low Energy) |
| Security | Encoding:
|
