OZAK BTX EU 400-D

Ozak BTX EU 400-D

Brend: Ozak
Kod proizvoda: Ozak BTX EU 400-D
Dostupnost: Na lageru

Cena: 1,137,240.00 RSD
Bez PDV-a: 947,700.00 RSD

A full height turnstile for locations aiming pedestrian access control and high level security with a clear passage height of 2120mm.
Offers more secure passages compared to 3 arm versions.
Provides two passage ways with installation of a single turnstile (double versions).
Having less than 98mm gap between upright bars, complys with UK Health and Safety Standards and supplied optionally with different materials.
Material used is phosphate-coated steel, finish is electrostatic paint
304 Grade stainless steel (for 25/S and 100/S types)
Complying to UK H&S Regulations (The gap between upright bars is less than 98 mm)
Complying to EU Regulations (Passage Clear Height is 2120 mm)
Down light is built-in property
Direction indicators are built-in property
Top Lid Lock
Top Lid (With Hinge Mechanism)

Power Requirements:

Dimensions:

Arm Features:

Four-section (for double-sided a pair) rotors (90°). Each section contains ten (for double-sided eleven) Ø42mmx2.5mm electrostatic powder coated (Opt. Hot dipped galvanized) or Ø40mm 304-Grade (Opt. 316-Grade) Stainless Steel (Opt. Ø38, Ø42 and Ø45mm) arms.

Body Features:

Constructed on main carriers, supported by tube profiles on lateral panels, strengthened by separators.
Material used is phosphate-coated steel, finish is electrostatic painted, stainless steel (304-Grade) or mixed combinations. (Opt. Hot dip galvanizing under the coating for outdoor models)
Top cover is protected against water for outdoors installation.
Upright bars at the frame are complying with UK H&S Regulations (The gap between upright bars is less than 98 mm).
Complying to EU Regulations (Clear Passage Height is 2120 mm).

Indicator Features:

Operating Temperature, Humidity, IP Rating

Minimum Passage Performance:

Control System:

All inputs are opto-coupler protected. Controlled by dry contact or grounding input.
Compatible with all access control systems that provide dry contact or grounding outputs.
Optional RS232/RS485/TCP IP control module is available.

Operation:

Manually operated bi-directional system (optional motorized) with dip switch selectable operational modes including controlled access on both-sides, one side free exit and restricted access modes.

Output Data:

Emergency Mode:

The rotor spins freely to allow free passage (Fail Safe default). Fail lock option is available.

Flow Rate:

Passage Capacity of Mechanical unit for Manual Version: ~ 60 passages/minute; Nominal: ~10-25 people/minute (for double sided: x2) (Recommended reference figure)

Passage Capacity of Mechanical unit for Motorized Version: ~60 passages/minute; Nominal: ~10-25 people/minute (for double sided: x2) (Recommended reference figure)

- Please note that; the above given figures are approximate for one person per walkway or lane.

Explanatory Note:
The system allows the new passage authorisation in less than ~0.3 seconds. After the passage authorization, the total passage time depends on the pushing and passage speed of the people.

-Utilisation of different access control units can change the flow rate.

Standard Features:

Optional Accessories and Applications

Remote control units (RF or with cable), interface unit for PC, RS485, RS232 and LAN, counter, audio-messaging system, base plate, coin slot/intelligent coin system and coin box, card reader pole, seat limiter for stadium solutions, animated indicators, internal battery and charge unit, motor driven unit, heater positive unit, separators, canopy, card reader mounting bracket.